Sagem F@ST 1400W Guide de l'utilisateur télécharger pdf (Page 23)

Configuring the wireless network 22

SAGEM F@st™ 1400 / 1400W

CONFIGURING THE WIRELESS NETWORK

Definitions

The wireless network is only available on the SAGEM F@st™

1400W.

The Wi-Fi technology protects the data flowing on your wireless network.

This protection is provided by two configurable parameters:

• the SSID identifier

• the WEP encryption key

The SSID is your wireless network’s identifier.

For your wireless network to be able to operate, you must key in the same SSID on your

modem/router and on all the computers making up your wireless network.

The WEP - Wired Equivalent Privacy - key serves to encrypt the information exchanged

over your wireless network.

Like the SSID, this WEP key must be configured identically on each computer making up

your wireless network as well as on your modem/router.

The WEP key format is defined by the IEEE 802.11b standard.

Configuring the wireless network on your modem/router

Once you are connected to your modem/router’s HTTP configurator, click on WLAN Setup

in the Basic menu.

• To activate the wireless network function, select Yes in the drop-down list in the WLAN

Network Operational field.

The default SSID is indicated on the cover of this guide.

• Modify the SSID field by the name of the network of your choice (32 characters at most).

You are advised to activate WEP encryption.

Select 128 bits in the drop-down list in the WEP Encryption field.

Choosing the transmission key

• Select the transmission key (keys n° 1 to 4) by clicking on one of the radio buttons.

The transmission key is used to encrypt the data transmitted by your computer.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

Pas de commentaire

Sagem F@ST 1400W Guide de l'utilisateur Page 23