Sagem F@ST 1400W Guide de l'utilisateur télécharger pdf (Page 16)

15 Configuring the modem/router

SAGEM F@st™ 1400 / 1400W

• Click on the Apple menu in the menu bar,

select System Preferences, then click on

the Network icon. The screen opposite will

appear.

The Location field should contain ADSL

USB Bridge/Router.

The Show field should contain Ethernet

Adaptor (en x), where "x" is a number

allocated by the operating system.

• Select the TCP/IP tab.

The Configure field should display Using

DHCP by default.

If this is not the case, select this value using the drop-down list.

If Using PPP value comes up on the screen, select the PPPoE tab and then

untick the Connect using PPPoE box.

Once the files have been copied onto the

hard disk, the screen opposite will appear.

• Connect the USB cable (5) to the modem/

router via the connector on the rear panel

marked USB and to the computer

(see § 4.4), then click on Continue.

The installation procedure has been

completed.

• Click on Restart.

• Click on Apply Now in order to validate the connection in DHCP mode.

The DHCP Client ID, DNS Servers and Search Domains fields are optional.

You can now access the modem/router’s HTTP configurator.

Refer to chapter 5 - "Access to the HTTP configurator", page 18.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Pas de commentaire

Sagem F@ST 1400W Guide de l'utilisateur Page 16