Sagem F@st 244x Guide d'installation télécharger pdf (Page 156)

6 - Information / Configuration

SAGEM F@st™ 240x/244x Reference Manual - 288097371-02

Page 6-86 Sagem Communication document. Reproduction and disclosure prohibited

Field Action

Physical LAN Port

Select the interface of your choice (ENET, USB,

Wireless or Wireless_Guest) from the scroll down

list.

Protocol

Select the protocol of your choice from the scroll

down list (TCP/UDP, TCP, UDP or ICMP).

Source IP Address

Enter a "Source" IP address.

Source Subnet Mask

Enter a "Source" subnet mask.

UDP/TCP source Port

(port or port:port)

Enter a "Source" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

Destination IP Address

Enter a "Destination" IP address.

SET-1 Destination Subnet

Mask

Enter a "Destination" subnet mask.

UDP/TCP Destination

Port

(port or port:port)

Enter a "Destination" port or range of ports.

Note: For one port, for example, enter 80. For a

range of ports, enter 80:90.

IP Precedence

Select the priority you will allocated to "IP

Precedence" from the scroll down list:

Blank : No priority,

0 to 7 : Priority (coded over 3 bits) from the

lowest to the highest.

IP Type Of Service

Select the type of service (TOS) to be allocated

(4-bit coding) from the scroll down list.

Normal Service : 0000

Minimize Cost : 0001

Maximize Reliability : 0010

Maximize Throughput : 0100

Minimize Delay : 1000

Differentiated Services

Code Point (DSCP)

Select the DSCP desirated from the scroll down list.

SET-2 802.1p Priority

Select a priority value between 0 and 7 from the

scroll down list.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 253 254

Commentaires sur ces manuels

Pas de commentaire

Sagem F@st 244x Guide d'installation Page 156

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Sagem F@st 244x