Sagem F@st 244x Guide d'installation télécharger pdf (Page 155)

6 - Information / Configuration

SAGEM F@st™ 240x/244x Reference Manual - 288097371-02

Sagem Communication document. Reproduction and disclosure prohibited Page 6-85

Type Of Service (TOS)

Object: This service allows to assign a type of service IP to PVC (TOS: Type Of Service).

The value assigned to a TOS IP corresponds to a value of priority queue.

Field Action

Traffic Class Name

Enter a name for the traffic class you want to create.

Assign ATM Transmit Priority

Select from the scroll down list:

Blank : No priority,

Low : "Low" emission priority,

Medium : "Medium" emission priority,

High : "High" emission priority.

Note : A high priority leads to low packet loss.

Mark IP Precedence

Select the priority you will allocated to "IP

Precedence" from the scroll down list:

Blank : No priority,

0 to 7 : Priority (coded over 3 bits) from the

lowest to the highest.

Mark IP Type Of Service

Select the type of service (TOS) to be allocated

(4-bit coding) from the scroll down list.

Normal Service : 0000

Minimize Cost : 0001

Maximize Reliability : 0010

Maximize Throughput : 0100

Minimize Delay : 1000

Mark 802.1p if 802.1q is enabled

on WAN

Select a priority value between 0 and 7 from the

scroll down list.

Note: The "Enable 802.1q" box is only present in

"Bridging" mode. This condition is

transparent for the other modes.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 253 254

Pas de commentaire

Sagem F@st 244x Guide d'installation Page 155