Sagem myC-1 Informations techniques télécharger pdf (Page 56)



Proc Sheet 1 02

myC-1

REMOVING / REPLACING THE ELASTOMER

KEYPAD

1/2

________________________________________________________________________________________________

Ref. SCT U38 SSC DTS 0016 - Index A – May 6, 2004 Page 5-15

6.18 Tools :

- A 0.6mm torx screwdriver

6.19 Preliminary operation

2. Remove the battery pack ( Proc sheet 0 01).

3. Remove the back cover ( Proc sheet 1 01).

6.20 Removal procedure :

1. Unstick the ground tape (2) of the radio shielding on the electronic board.

2. Turn the electronic board round to liberate it from the front cover (1)

3. Remove the elastomer keypad (2) from the front cover (1).

6.21 Placement procedure :

1. Clean the elastomer keypad (2) with compressed air.

2. Place the elastomer keypad (2) in position in its housing

3. Place the electronic board in its housing

4. Stick the ground tape (2) on the electronic board by fixing correctly on the radio shielding

Nota: If the ground tape have been damaged during operations, change automatically the LCD foam

for ESD.

6.22 Further operations :

1. Replace the back cover ( Proc sheet 1 01).

2. Replace the battery pack ( Proc sheet 0 01).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 93 94

Pas de commentaire

Sagem myC-1 Informations techniques Page 56